symbol v ds v gs i dm t j , t stg symbol ty p max 300 360 350 425 r jl 280 320 junction and storage temperature range a p d c 0.35 0.22 -55 to 150 t a =70c i d -1.2 -1.0 -10 pulsed drain current b power dissipation a t a =25c continuous drain current a maximum units parameter t a =25c t a =70c absolute maximum ratings t a =25c unless otherwise noted v v 8 gate-source voltage drain-source voltage -20 c/w maximum junction-to-ambient a steady-state c/w w maximum junction-to-lead c steady-state c/w thermal characteristics parameter units maximum junction-to-ambient a t 10s r ja AO7407 features v ds (v) = -20v i d = -1.2 a r ds(on) < 135m ? (v gs = -4.5v) r ds(on) < 170m ? (v gs = -2.5v) r ds(on) < 220m ? (v gs = -1.8v) the AO7407 uses advanced trench technology to provide excellent r ds(on) , low gate charge and operation with gate voltages as low as 1.8v. this device is suitable for use as a load switch or in pwm applications. s g d sc-70 sot 323 top view g d s p-channel enhancement mode field general description effect transistor www.freescale.net.cn 1 / 6
AO7407 symbol min typ max units bv dss -20 v -1 t j =55c -5 i gss 100 na v gs(th) -0.3 -0.55 -1 v i d(on) -10 a 111 135 t j =125c 141 175 137 170 m ? 169 220 m ? g fs 47 s v sd -0.78 -1 v i s -0.6 a c iss 540 pf c oss 72 pf c rss 49 pf r g 12 ? q g 6.2 nc q gs 0.54 nc q gd 1.44 nc t d(on) 12 ns t r 10.7 ns t d(off) 74 ns t f 28.7 ns t rr 24.5 ns q rr 17.4 nc body diode reverse recovery time body diode reverse recovery charge i f =-1a, di/dt=100a/ s drain-source breakdown voltage on state drain current i d =-250 a, v gs =0v v gs =-1.8v, i d =-1a v gs =-4.5v, v ds =-5v v gs =-4.5v, i d =-1.2a reverse transfer capacitance electrical characteristics (t j =25c unless otherwise noted) static parameters parameter conditions i dss a gate threshold voltage v ds =v gs i d =-250 a v ds =-16v, v gs =0v v ds =0v, v gs =8v zero gate voltage drain current gate-body leakage current r ds(on) static drain-source on-resistance forward transconductance diode forward voltage m ? v gs =-2.5v, i d =-1a i s =-1a,v gs =0v v ds =-5v, i d =-3a i f =-1a, di/dt=100a/ s v gs =0v, v ds =-10v, f=1mhz switching parameters total gate charge v gs =-4.5v, v ds =-10v, i d =-1a gate source charge gate drain charge turn-on rise time turn-off delaytime v gs =-4.5v, v ds =-10v, r l =15 ? , r gen =3 ? gate resistance v gs =0v, v ds =0v, f=1mhz turn-off fall time maximum body-diode continuous current input capacitance output capacitance turn-on delaytime dynamic parameters a: the value of r ja is measured with the device mounted on 1in 2 fr-4 board with 2oz. copper, in a still air environment with t a =25c. the value in any a given application depends on the user's specific board design. the current rating is based on the t 10s thermal resistance rating. b: repetitive rating, pulse width limited by junction temperature. c. the r ja is the sum of the thermal impedence from junction to lead r jl and lead to ambient. d. the static characteristics in figures 1 to 6,12,14 are obtained using 80 s pulses, duty cycle 0.5% max. e. these tests are performed with the device mounted on 1 in 2 fr-4 board with 2oz. copper, in a still air environment with t a =25c. the soa curve provides a single pulse rating. www.freescale.net.cn 2 / 6
AO7407 typical electrical and thermal characteristics 0 5 10 15 012345 -v ds (volts) fig 1: on-region characteristics -i d (a) v gs =-1.5v -2.0v -2.5v -4.5v -8v -3.0v 0 1 2 3 4 5 6 0 0.5 1 1.5 2 2.5 -v gs (volts) figure 2: transfer characteristics -i d (a) 25c 125c v ds =-5v 75 100 125 150 175 200 225 0246 -i d (a) figure 3: on-resistance vs. drain current and gate voltage r ds(on) (m ? ) v gs =-1.8v v gs =-2.5v v gs =-4.5v 1e-05 1e-04 1e-03 1e-02 1e-01 1e+00 1e+01 0.0 0.2 0.4 0.6 0.8 1.0 1.2 -v sd (volts) figure 6: body-diode characteristics -i s (a) 25c 125 0.8 1 1.2 1.4 1.6 0 25 50 75 100 125 150 175 temperature (c) figure 4: on-resistance vs. junction temperature normalized on-resistance v gs =-2.5v v gs =-1.8v v gs =-4.5v 75 100 125 150 175 200 225 12345678 -v gs (volts) figure 5: on-resistance vs. gate-source voltage r ds(on) (m ? ) i d =-1a 25c 125c i d =-1a www.freescale.net.cn 3 / 6
AO7407 typical electrical and thermal characteristics 0 1 2 3 4 5 02468 -q g (nc) figure 7: gate-charge characteristics -v gs (volts) 0 200 400 600 800 0 5 10 15 20 -v ds (volts) figure 8: capacitance characteristics capacitance (pf) c iss c oss c rss 0 2 4 6 8 10 12 0.001 0.01 0.1 1 10 100 1000 pulse width (s) figure 10: single pulse power rating junction-to- ambient (note e) power (w) 0.01 0.1 1 10 0.00001 0.0001 0.001 0.01 0.1 1 10 100 1000 pulse width (s) figure 11: normalized maximum transient thermal impedance z t ja normalized transient thermal resistance 0.1 1.0 10.0 100.0 0.1 1 10 100 -v ds (volts) -i d (amps) figure 9: maximum forward biased safe operating area (note e) 100 p s 10ms 1ms 0.1s 1s 10s dc r ds(on) limited 10 p s t j(max) =150c t a =25c v ds =-10v i d =-1.0a single pulse d=t o n / t t j,pk =t a +p dm .z t ja .r t ja r t ja =360c/w t o n t p d in descending order d=0.5, 0.3, 0.1, 0.05, 0.02, 0.01, single pulse t j(max) =150c t a =25c www.freescale.net.cn 4 / 6
note: 1. lead finish: 150 microinches ( 3.8 um) min. thickness of tin/lead (solder) plated on lead 2. tolerance 0.10 mm (4 mil) unless otherwise specified 3. coplanarity : 0.10 mm 4. other name of this package is called sot-323 sc-70 3l package data recommendation of land pattern p n w note: p - part number code. n - foundry and assembly location code w - yaer and week code. l t - assembly lot code. code AO7407 7 part no. sc-70 3l part no. code package marking description rev. a q 0.10 0.00 a1 1.00 0.20 0.40 1.35 0.40 2.20 2.20 0.30 0.65 bsc e 1 0.10 l q 1 e1 1.30 bsc 8 0.25 0.90 0.10 0.30 2.00 1.15 1.80 d e1 f e b c a2 1.10 max dimensions in millimeters symbols 0.90 min a l t www.freescale.net.cn 5 / 6
sc-70 3l tape and reel data sc-70 3l carrier tape sc-70 3l reel sc-70 3l tape leader / trailer & orientation www.freescale.net.cn 6 / 6
|
